Diy Deer Feeder Trough 2021

The Hopper Holds 150 Pounds Of.

Use at least four screws per. The feeder can be built as long as you want, with the help of wooden balusters and rafters. A 55 gallon barrel, either.

Some Are As Easy As A Piece Of 4 Inch Pvc Pipe With A 45 Degree Splice Glued To The Bottom.

You can simply cut the trough in half and use the resulting halves for placing. Make sure that the legs are of equal distance and height with the use of a spirit level. Take 5′ pipe and cut two 3” long pieces.

It’s Also Weathertight To Keep Deer Feed Dry.

Made from thick and durable polyethylene plastic, the green feeder blends in with outdoor foliage. See more ideas about deer feeders, deer feeder diy, deer. Add a filler strip along the bottom edge of the feeder, below.

Materials Needed For Building A Pvc Pipe Deer.

Watch this youtube video to learn how to build a homemade deer feeder that uses gravity to keep the corn flowing downward. The trough should be at least 2’ wide by 5’, long and can hold about 200 pounds of feed. The zenature feeder will arrive unassembled, so you will need to assemble it before the first use.

1, 24” X 72” Sheet Of Treated Plywood.

Deer feeders come in all shapes and sizes. Doug hit it on the head pvc pipe is the best and its weather resistant easy to paint.attach to the tree with a couple of bungee cords and put a small rockunder pvc pipe. The sides of the trough should be around 24 inches off the.