How To Fill Holes In Wood Floor

Push The Sawdust Down Into The Pva So It Is Level With The Top Of The Board.

It should help the filler to go in between the boards a bit more evenly. While most commonly used in repairing holes in car bodies, you can also use it for large gaps and holes in wood. Press it firmly into place with a putty knife.

Once Clean, Trowel The Cement Or Epoxy Into The Void With A Slapping Motion, Coming At It From Multiple Angles.

You can use a wet but soaked cloth or sandpaper for this purpose. However, it’s much less flexible when applied. Blend the color sticks to get the right color.

Finish Things Up By Using Your Vacuum To Suck Up Any Remaining Dust.

The company i used filled most of the nail holes (they missed some) and also filled in between some of the wood strips. Not sure how to properly fill it or what to use? Leave until pva is dry and then go over the joint with a small electric sander.

No Matter What Type Of Sawdust You Mix, The Final Color.

Before you begin filling gaps in old wood floors with caulk, make sure you have properly inserted the tube into a standard caulk gun. Today it’s going to be all about how to fill wood holes. If that doesn’t resolve your problem, or if your gaps reappear, there are three main methods of filling gaps in wood flooring, which are:

Using A Dust And Resin Filling.

2 rows type of wood hole type of material to fill a hole in wood; Wood flooring tips from greenpointe: Press it firmly into place with a putty knife.